The Priest 2

RRP 999€

Research and Development

The Priest was carefully designed. The results were carefully measured and estimated.

We designed a special equipment for measurements which helped us to achieve the best results possible.

Multi Calibers

Priest is available in 4.5 (.177), 5.5 (.22), 6.35 (.25), 7.62 (.30) calibers and arrow barrel.

What's included?

In standard configuration, Alu bottle, fixed reg, classic buttpad.

RRP 999€

Rifle is retailing at 999€. Please contact our retailers for more info.

Compact and Light

When designing the rifle we had compactness and lightness in mind. The Priest measures 710mm in length and weighs only 3kg with the bottle and 2,1kg without it. Because of the smart design, the bottle can be carried on your waist, connected with a very flexible high pressure hose to the rifle. It also has one of the lowest profile (157mm), meaning the distance from rail to the bottom of the grip.

Plenum Extension

Plenum Extension gives you an extra 22ccm of regulator air volume. Total of 57ccm of regulated air volume. Available as an addition. Compatible with older Priests.

Straight Pull

Cocking handle allows you to quickly cock the rifle, because of the smartly designed and positioned cocking mechanism which is on the left front side of the rifle. This enables you to never remove your finger from the trigger. Straight pull speeds up your cocking action because all you need to do is pull the handle straight back and return it to its original position.

Hi-Cap Bottle with Regulator

Priest comes with a 320cc buddy bottle which has a working pressure of 300bar. On top of it it has a pressure regulator which is by default set to 125bar. This combination allows us to make a whole lot of consistent shots.

Tan or Black

Available in Cerakote Tan or hard anodised black.

CZ Barrels

The Priest is equipped with a 20" choked cold forged barrel made by famous CZ company in the Czech Republic.

Externally Adjustable Pressure Regulator

To satisfy the most advanced shooters, we have developed a new pressure regulator for Priest series which allows the shooter to adjust pressure externally without having to empty the tank.

Pressure can be regulated from 50 bar to 200 bar.

It can be bought as an addition and can be fitted on all the Priests (old or new) and other rifles with the same thread. Thread on the bottle side is M18x1.5. Thread on the output side is G1/2-14.

Extended Stock with Adjustable Hammer Spring Screw

Externally Adjustable Pressure Regulator works best with the Extended Stock which allows the shooter to adjust hammer spring tension to desired setting, so optimal performance can be achieved.

Stock can be fitted to all versions of Priest.

20 MOA Angled Picatinny Rail

Due to high accuracy, long range shooting isn't a problem with the Priest 2. In order to be able to use your scope so far out, we developed a Picatinny Rail with a 20 MOA drop and is available as an addition.

Carbon Bottle 0.5L

In order to get an even lighter (200g lighter) and better balanced rifle with more shots per fill we are offering Carbon Bottle as an addition.

Carbon Bottle's volume is 0.5L whereas volume of Aluminium bottle is 0.35L. You can expect around 40 % more shots per fill.

5,5 (.22) Long Range Pellet Barrel

Standard airgun barrels were never meant for shooting at high velocities (eg. 300m/s) at extreme long ranges (eg. 100m). This is why we developed a custom Lothar Walther airgun barrel for Long Range Pellet shooting. The barrel is capable of shooting JSB Monsters Redesigned (25 grains) at 320 m/s at 100m without loosing the stability of the projectile. The barrel is available as an addition.

Inter-changeable Calibers

No matter in which caliber you purchase the rifle, all you need to do, to change the caliber, is to buy a new caliber kit which contains barrel, pellet pusher and shroud cap which are all the necessary parts to do the transformation. (Barrel exchange tool is not included in the kit).

Ambidextrous Mag

Since the magazine is not centered, it can be inserted from both directions, so even if you are a lefty, the magazine is not in your way.

Threaded Muzzle

For those who want even quieter rifle, there's a 1/2" UNF thread under the cap so a moderator can be mounted.

Adjustable Trigger

First and second stage of the trigger can be easily adjusted down to 200g.

Two Picatinny and two Dovetails

Rifle is equipped with a 170mm of picatinny rail so you can fit whichever optics you prefer. Another picatinny is located on the bottom of the front body which can be used for any number of accessories, such as bipod. There are also two dovetails located on the side of the front body.

Shooting Arrows

For those who want to hunt bigger game, barrel for arrows is also available.

Powerful

In standard setup Priest achieves consistent 45J in caliber 5.5 (.22) throughout its whole bottle capacity which yields out more than 110 shots.

Youtube Review

Youtube review done by a reviewer Gregor Kamenšek which covers basically all the features and accuracy.

Pressure Test

Safety valve test and high pressure test of the bottle and threads. For more info of the test please check the video description.

First test is a test of a safety valve which should burst at 3000 psi (a bit over 200 bar).

Second test is a pressure test at 800 bar.

No Bounce

A lot of time was spent to acheive a perfect harmony of elements working together which at the end result as a system without hammer bounce and perfect valve closing time, which closes before the pellet leaves the barrel, that makes the rifle extremely efficient.

Exploded View

Click here the image to download exploded view of Priest II.

Technical information

4.5 (.177) 5.5 (.22) 6.35 (.25) 7.62 (.30)
Energy
Rifle can also be bought in 7J, 16J, 20J or 24J
24J 45J 60J 90J
Air Capacity 320cc
Max filling pressure 300bar
Plenum Volume 35ccm
Bottle Removable aluminium buddy bottle
Magazine capacity 14 12 10 7
Max pellet length in magazine
which still fits in the magazine (all calibers)
12mm
Max pellet length single shot
which can fit in to the barrel without the magazine (all calibers)
16mm
Shots per fill
With 0.35L bottle
/ 110 / 40
Trigger 2 stage, adjustable down to 200g
Cocking system Straight pull
Grip Standard AR15 grip (must be without beaver tail)
Barrel CZ 20", 12 grooves, 1:17,7", choked CZ 20", 12 grooves, 1:17,7", choked CZ 20", 10 grooves, 1:17,7", choked Lothar Walther 20", 6 grooves, 1:16", choked
Arrow Barrel Available as an addition (Arrows X7 2212)
Caliber Kits Different caliber kits can be bought as an addition so you can easily change a caliber of your rifle
Pressure regulator By default set to 125bar.
Externally Adjustable Pressure Regulator available as an addition.
Trigger safety Yes
Optics Picatinny rail
Picatinny rail length 170mm
Pressure gauge On the bottle which shows pressure in the bottle
Total length 710mm
Max height 157mm
Max width 35mm
Bottle diameter 61mm
Weight 3kg with buddy bottle
2,1kg without buddy bottle
Charging type Foster coupling