RRP 999€
The Priest was carefully designed. The results were carefully measured and estimated.
We designed a special equipment for measurements which helped us to achieve the best results possible.
Priest is available in 4.5 (.177), 5.5 (.22), 6.35 (.25), 7.62 (.30) calibers and arrow barrel.
In standard configuration, Alu bottle, fixed reg, classic buttpad.
Rifle is retailing at 999€. Please contact our retailers for more info.
When designing the rifle we had compactness and lightness in mind. The Priest measures 710mm in length and weighs only 3kg with the bottle and 2,1kg without it. Because of the smart design, the bottle can be carried on your waist, connected with a very flexible high pressure hose to the rifle. It also has one of the lowest profile (157mm), meaning the distance from rail to the bottom of the grip.
Plenum Extension gives you an extra 22ccm of regulator air volume. Total of 57ccm of regulated air volume. Available as an addition. Compatible with older Priests.
Cocking handle allows you to quickly cock the rifle, because of the smartly designed and positioned cocking mechanism which is on the left front side of the rifle. This enables you to never remove your finger from the trigger. Straight pull speeds up your cocking action because all you need to do is pull the handle straight back and return it to its original position.
Priest comes with a 320cc buddy bottle which has a working pressure of 300bar. On top of it it has a pressure regulator which is by default set to 125bar. This combination allows us to make a whole lot of consistent shots.
Available in Cerakote Tan or hard anodised black.
To satisfy the most advanced shooters, we have developed a new pressure regulator for Priest series which allows the shooter to adjust pressure externally without having to empty the tank.
Pressure can be regulated from 50 bar to 200 bar.
It can be bought as an addition and can be fitted on all the Priests (old or new) and other rifles with the same thread. Thread on the bottle side is M18x1.5. Thread on the output side is G1/2-14.
Externally Adjustable Pressure Regulator works best with the Extended Stock which allows the shooter to adjust hammer spring tension to desired setting, so optimal performance can be achieved.
Stock can be fitted to all versions of Priest.
Due to high accuracy, long range shooting isn't a problem with the Priest 2. In order to be able to use your scope so far out, we developed a Picatinny Rail with a 20 MOA drop and is available as an addition.
In order to get an even lighter (200g lighter) and better balanced rifle with more shots per fill we are offering Carbon Bottle as an addition.
Carbon Bottle's volume is 0.5L whereas volume of Aluminium bottle is 0.35L. You can expect around 40 % more shots per fill.
Priest II is also available in Compact variant. Total length of 635mm.
No matter in which caliber you purchase the rifle, all you need to do, to change the caliber, is to buy a new caliber kit which contains barrel, pellet pusher and shroud cap which are all the necessary parts to do the transformation. (Barrel exchange tool is not included in the kit).
Since the magazine is not centered, it can be inserted from both directions, so even if you are a lefty, the magazine is not in your way.
For those who want even quieter rifle, there's a 1/2" UNF thread under the cap so a moderator can be mounted.
First and second stage of the trigger can be easily adjusted down to 200g.
Rifle is equipped with a 170mm of picatinny rail so you can fit whichever optics you prefer. Another picatinny is located on the bottom of the front body which can be used for any number of accessories, such as bipod. There are also two dovetails located on the side of the front body.
For those who want to hunt bigger game, barrel for arrows is also available.
In standard setup Priest achieves consistent 45J in caliber 5.5 (.22) throughout its whole bottle capacity which yields out more than 110 shots.
Youtube review done by a reviewer Gregor Kamenšek which covers basically all the features and accuracy.
Safety valve test and high pressure test of the bottle and threads. For more info of the test please check the video description.
First test is a test of a safety valve which should burst at 3000 psi (a bit over 200 bar).
Second test is a pressure test at 800 bar.
A lot of time was spent to acheive a perfect harmony of elements working together which at the end result as a system without hammer bounce and perfect valve closing time, which closes before the pellet leaves the barrel, that makes the rifle extremely efficient.
Click here the image to download exploded view of Priest II.
| 4.5 (.177) | 5.5 (.22) | 6.35 (.25) | 7.62 (.30) | |
|---|---|---|---|---|
|
Energy
|
24J | 45J | 60J | 90J |
| Air Capacity | 320cc | |||
| Max filling pressure | 300bar | |||
| Plenum Volume | 35ccm | |||
| Bottle | Removable aluminium buddy bottle | |||
| Magazine capacity | 14 | 11 | 10 | 7 |
| Max pellet length in magazine |
12mm | |||
| Max pellet length single shot |
16mm | |||
| Shots per fill |
/ | 100 | / | 40 |
| Trigger | 2 stage, adjustable down to 200g | |||
| Cocking system | Straight pull | |||
| Grip | Standard AR15 grip (must be without beaver tail) | |||
| Barrel | LW 20", choked | LW 24", choked | LW 24", choked | LW 24", 1:16", choked |
| Arrow Barrel | Available as an addition (Arrows X7 2212) | |||
| Caliber Kits | Different caliber kits can be bought as an addition so you can easily change a caliber of your rifle | |||
| Pressure regulator | By default set to 125bar. Externally Adjustable Pressure Regulator available as an addition. |
|||
| Trigger safety | Yes | |||
| Optics | Picatinny rail | |||
| Picatinny rail length | 170mm | |||
| Pressure gauge | On the bottle which shows pressure in the bottle | |||
| Total length | 710mm | |||
| Max height | 157mm | |||
| Max width | 35mm | |||
| Bottle diameter | 61mm | |||
| Weight |
3kg with buddy bottle 2,1kg without buddy bottle |
|||
| Charging type | Foster coupling | |||
